Skip to content

Free Crochet & Knitting Gauge Calculator

Check if your gauge matches the pattern, convert stitch and row counts to your own gauge, and find the size that will fit. It’s free, it works for crochet and knitting, and your numbers stay on your device.

Units
Pattern gauge

From the pattern, e.g. "14 hdc × 10 rows = 4 in".

in
Your gauge

From your swatch. Not 4 in? Measure it here

in
Enter both gaugesthe pattern's and yours, to see if they match.
Your piece (filled) compared with the pattern's size (dashed outline)
pattern size your piece

Check a measurement

in
Yours–
in
Yours–

How to use the gauge calculator

  1. Type the pattern’s gauge: the stitches, the rows and the size they are measured over (usually 4 in or 10 cm).
  2. Make a swatch and type your gauge the same way. Your swatch isn’t exactly 4 inches? The Measure swatch tab works it out from any size.
  3. Read the verdict in Compare: it tells you if your gauge matches, how much bigger or smaller your piece would come out, and which hook to try.
  4. Happy with your fabric? Convert turns the pattern’s stitch and row counts into yours, and Which size? shows which size comes out right with your gauge.
  5. Copy results or Share link sends your numbers to a friend, or to us if you have a question about one of our patterns.

What is gauge in crochet?

Gauge is the number of stitches and rows that fit in a set size of fabric, usually a 4 × 4 inch (10 × 10 cm) square. In the UK and Australia it’s called tension. Every pattern that needs a precise size gives its gauge near the top, like this:

Gauge: 14 hdc × 10 rows = 4 in (10 cm) with a 5.5 mm (I-9) hook

In the designer’s fabric, 14 half double crochet stitches measure 4 inches across and 10 rows measure 4 inches up. Your hook, your yarn and the way you hold it all change the size of your stitches, so two people following the same pattern often get different gauges. That’s normal: you just need to know yours.

The same 14 stitches measure 4 inches at the pattern’s gauge (14 stitches per 4 inches) but only 3.7 inches at 15 stitches per 4 inches.Pattern: 14 sts = 4 in4 inYours: 15 sts = 4 in3.7 in
Same 14 stitches, two gauges: at 15 stitches per 4 in, the pattern’s 4 inches come out 3.7 inches.

Why gauge matters (and when it doesn’t)

Small differences add up over a whole piece. With just one stitch more per 4 inches (15 instead of 14), a sweater that should measure 40 inches around comes out 37.3 inches: a whole size smaller. Gauge also changes how much yarn you need, since looser fabric uses more.

Matters a lot

Tops, dresses and cardigans

Anything that has to fit a body. Match the pattern’s gauge, or use the Which size? tab to choose the size that fits with your gauge.

Often not needed

Hats that work with any yarn

Many of our hat patterns are written to work with any yarn weight and need no swatch: the description says so (“works with any yarn gauge”). Follow the measurements in the pattern to get the size right.

Size and yarn

Blankets, scarves and shawls

Being a little off only makes them a little bigger or smaller. But a looser gauge uses more yarn, so check it before you buy the last skeins.

Tight on purpose

Amigurumi and toys

Tight stitches matter more than exact gauge: use a hook smaller than the yarn label suggests so the stuffing doesn’t show through.

Yarn weight vs gauge

The two get mixed up a lot. When a pattern description says “any yarn gauge”, it means any yarn weight.

  • Yarn weight is how thick the yarn is: lace, fingering, DK, worsted, bulky… numbered 0 to 7. Our yarn weight chart lists them all with their hook sizes.
  • Gauge is how many stitches and rows you get in 4 inches with that yarn, your hook and your hands.

The same worsted yarn can give 12 or 16 stitches per 4 inches depending on the hook and the person holding it. That’s why a pattern gives a gauge, not only a yarn weight.

How to make a crochet gauge swatch

  1. Use the yarn, the hook and the stitch named in the pattern’s gauge (for example hdc). If it says “in pattern”, work the pattern’s stitch repeat.
  2. Make it bigger than 4 inches: at least 6 × 6 in (15 × 15 cm). The edges are uneven, so you only measure the middle. For 14 stitches per 4 in, that’s about 21 stitches plus the turning chain.
  3. Work rows until the swatch is about 6 inches tall.
  4. Block it the way you will block the finished piece (see below) and let it dry flat.
  5. Measure it, then type the numbers into the calculator above.

Gauge swatch in the round (hats)

Fabric worked in the round can come out at a different gauge than flat rows, because you never turn the work. For a hat, crochet the first rounds of the crown and measure across the flat circle: most hat patterns give the crown’s width after the increases. Or swatch in the round too, as a small tube or a flat circle in the pattern’s stitch.

How to measure crochet gauge

  1. Lay the swatch flat on a table without stretching or squashing it.
  2. Put a ruler across the middle, at least one stitch away from the edges.
  3. Count the stitches in 4 inches (10 cm), including half stitches: 14.5 is a real answer.
  4. Turn the ruler upright and count the rows in 4 inches.
  5. Measure in two or three places and take the average. Swatch smaller than 4 inches? Count over what you have and use the Measure swatch tab.
A crochet swatch with a dashed 4 inch square in the middle and a ruler: count the stitches and rows inside the square, away from the edges.count the stitches and rows inside the square4 in (10 cm)
Measure in the middle of the swatch, away from the edges.

Counting rows of sc, hdc and dc

sc

Single crochet (sc)

Short rows. Worked back and forth, two rows make one ridge: count the ridges and double the number.

hdc

Half double crochet (hdc)

Each row has a horizontal bar on one side (the “third loop”). It belongs to the stitch: count one row per stitch height.

dc

Double crochet (dc)

Tall rows that are easy to see: one tall post is one row.

Should you measure gauge before or after blocking?

After, in most cases. Blocking (wetting or steaming a piece and letting it dry flat) relaxes the stitches, and cotton, linen and acrylic can grow or shrink quite a bit. Block your swatch exactly the way you’ll treat the finished piece, let it dry, then measure. If a pattern says its gauge is “before blocking” or “unblocked”, measure before. When in doubt, measure both and write them down.

My crochet gauge is too small or too big: what to do

Too many stitches

Gauge too small (tight)

More stitches in 4 inches than the pattern means smaller stitches, so your piece comes out smaller. Go up a hook size (for example 5 mm to 5.5 mm), make a new swatch and measure again.

Too few stitches

Gauge too big (loose)

Fewer stitches than the pattern means bigger stitches, so your piece comes out bigger. Go down a hook size and make a new swatch.

Your stitches match but your rows don’t

Usually fine. Many patterns say “work until the piece measures…”: then you just measure. If the pattern counts rows (armholes, sleeves, shaping), your piece comes out longer or shorter: convert the rows in the Convert tab or follow the measurements. Row height depends a lot on how far you pull up your loops, so it’s often off even when the stitches match.

Changed hooks and it’s still off?

  • Tight foundation chain? Make the chain with a hook one or two sizes bigger, then switch back.
  • Relax your grip. Tension gets tighter when you’re tired, rushing or concentrating hard.
  • Check the yarn. The same weight from another brand or fibre can behave quite differently.
  • Measure again after a few inches of the real piece: gauge often changes once you settle into a project.

Or keep your fabric

If you love how your swatch looks and feels, you don’t have to match the pattern exactly. Use Which size? to pick the size that will measure right with your gauge, and Convert for counted stitches or rows.

Does the gauge calculator work for knitting?

Yes. Gauge works the same way in knitting: stitches and rows over 4 inches. Use needles instead of hooks: a bigger needle gives fewer stitches per 4 inches, a smaller one gives more.

Gauge FAQ

Short answers to the questions we hear most. Each one has its own link, so you can share it.

What is gauge in crochet?

Gauge is how many stitches and rows fit in a square of fabric, usually 4 × 4 inches (10 × 10 cm). In the UK it’s called tension. A pattern gives the gauge the designer got, for example “14 hdc × 10 rows = 4 in with a 5.5 mm hook”. If your fabric has the same number of stitches and rows, your piece comes out the size the pattern says.

Why does gauge matter?

Small differences add up. With one extra stitch every 4 inches, a sweater meant to be 40 inches around comes out about 37 inches. For tops, dresses and cardigans that’s the difference between fitting and not. Gauge also changes how much yarn you use.

Do I need to check gauge for every pattern?

No. Check it whenever the size matters: tops, dresses, cardigans and anything fitted. Patterns written to work with any yarn weight, like many of our hats, don’t need a swatch, and the description tells you so. If a pattern lists a gauge, it matters for that pattern.

A description says “any yarn gauge”. What does that mean?

It means any yarn weight: how thick the yarn is (fingering, DK, worsted…). Gauge in a pattern means the number of stitches and rows in 4 inches, which depends on your yarn, your hook and your hands. See the yarn weight chart for the yarn weights.

How big should my gauge swatch be?

At least 6 × 6 inches (15 × 15 cm), even though you only measure 4 inches. The edges are uneven, so you measure in the middle. Use the same yarn, hook and stitch as the pattern.

How do I measure my gauge?

  1. Lay the swatch flat without stretching it.
  2. Put a ruler across the middle, away from the edges.
  3. Count the stitches in 4 inches, including half stitches.
  4. Count the rows in 4 inches.
  5. Measure in two or three places and take the average.

If your swatch isn’t 4 inches, the calculator’s Measure swatch tab works with any size.

How do I count rows of hdc or dc?

Count the stitches stacked on top of each other, one per row, not the gaps between them. A dc row is one tall post. An hdc row has a horizontal bar on one side that belongs to the stitch, so count one row per stitch height. It’s easiest on the right side of the work, in good light.

Should I measure before or after blocking?

After, in most cases. Block your swatch the same way you’ll block the finished piece (wet, steam or not at all), let it dry, then measure. Blocking can change gauge a lot, especially with cotton and acrylic. If a pattern says “gauge before blocking”, measure before.

My gauge is too small (too many stitches). What do I do?

More stitches than the pattern means your fabric is tighter, so your piece will come out smaller. Try a bigger hook (for example 5 mm → 5.5 mm), make a new swatch and measure again. The calculator’s Compare tab shows how much smaller it would be.

My gauge is too big (too few stitches). What do I do?

Fewer stitches than the pattern means your fabric is looser, so your piece will come out bigger. Try a smaller hook and make a new swatch. If the fabric then feels too stiff, try a slightly thinner yarn of the same weight.

My stitches match but my rows don’t. Does it matter?

Usually less. If the pattern says “work until the piece measures…”, just measure. If it gives a number of rows (sleeves, armholes, shaping), your piece will be longer or shorter: use the calculator’s Convert tab to get your row count, or follow the measurements.

I used the hook the pattern says. Why is my gauge different?

Everyone holds yarn differently, so the hook in a pattern is a starting point, not a rule. The same yarn and hook can give one person 14 stitches and another 16. That’s normal: change the hook until your stitch count matches.

Can I use a different yarn than the pattern?

Yes. Choose the same yarn weight, make a swatch and check that your gauge matches. Cotton, wool and acrylic behave differently, so the swatch matters even more. Buy by length (yards or metres), not by the number of balls.

My gauge is different. Which size should I make?

You can keep your fabric and choose another size. Type the pattern’s finished measurements and your gauge into the calculator’s Which size? tab: it shows what each size measures with your gauge and picks the one closest to the measurement you want. Lengths that are counted in rows may still need small changes.

How do I check gauge for a hat?

Work the first rounds of the crown, lay it flat and measure across the circle, then compare it with the width the pattern gives. A flat swatch can give a different gauge than working in the round. Hats written for any yarn weight are sized by their measurements, so follow those as you go.

Can my gauge change while I crochet?

Yes. Tension often changes when you’re relaxed, tired or rushing, and after a long break. For a big project, measure again after a few inches and compare it with your swatch.

Does this calculator work for knitting?

Yes. Gauge works the same way in knitting: stitches and rows over 4 inches. A bigger needle gives fewer stitches, a smaller needle more.

Is the calculator free? Are my numbers saved?

Yes, it’s free, with no account and no ads. Your last numbers are kept only in your own browser on this device and never sent to us. “Share link” puts your numbers in the link itself, so you can send it to a friend or to us.

Put your gauge to work

Tops, sweaters and cardigans are where gauge matters most. These are the ones crocheters love, each with step-by-step photos.

More free tools: row & stitch counter · yarn weight chart · all tools